6KW DC48V AC120V&240V Split Phase Dual Output Pure Sine Wave Off-grid Power Inverter Lead-acid Gel Battery Charger
ZK17,300.00 ZK13,849.00
The same product /weight to different country/zone with different shipping freight,so please consult us.
♦High overload ability up to 300% rated power (20 sec)
♦Low quiescent current, power saver mode
♦On battery charger
♦3-step intelligent battery charging
♦Uses PFC (power factor correction) for the charger
♦On transfer
♦10ms typical transfer time
♦15s delay before transfer when AC resumes
♦Option
♦Battery / AC priority switch available for off-grid solar / wind system
♦Auto generator starter
♦Remote control
♦Battery temperature sensor
Description
6KW DC48V AC120V&240V Split Phase Dual Output Pure Sine Wave Off-grid Power Inverter Lead-acid Gel Battery Charger    Â
Inverter: if you want to buy, please tell us the below parameters:
Â
-
Where do you need the inverter used for?Â
-
What’s the type of load and the total load capacity? (xxx W /xxx KW)
-
What’s the input DC voltage? (12V? 24V? or 48V?)Â
-
What’s the output  AC voltage do you need?  (220V?  110V?  120V or 120V/240V complementary? )
-
What’s the kind of your battery? (Lead-acid? Colloidal? Lithium or others) If you used the Lithium battery, please share the battery parameters with us to matching the inverter, such as the Rated voltage, Overvoltage & Under voltage protecting parameter. unless you will buy it from us.
-
What’s the type of charging power? (Utility power? Solar Power? Or the Generator Power? )
-
If you have solar power, do you need the related MPPT? If yes, please share the total capacity of solar panels. (xxx W /xxx KW)
-
If you need the related MPPT, do you need the external single MPPT or the build-in MPPT? (The build-in MPPT is built into the Inverter as an integrated Inverter. )
PSW7 Pure Sinewave Inverter/Charger |
||||||||
Inverter Output |
Model |
AP |
AP |
AP |
AP |
AP |
AP |
AP |
1000W |
1500W |
2000W |
3000W |
4000W |
5000W |
6000W |
||
Continuous Output Power |
1000W |
1500W |
2000W |
3000W |
4000W |
5000W |
6000W |
|
Surge Rating(the 20s) |
3000W |
4500W |
6000W |
9000W |
12000W |
15000W |
18000W |
|
Capable of Starting Electric Motor |
1HP |
1.5HP |
2HP |
3HP |
4HP |
5HP |
6HP |
|
Output Waveform |
Pure Sinewave/Same as input(Bypass mode) |
|||||||
Nominal Efficiency |
>88%(Peak) |
|||||||
Line Mode Efficiency |
>95% |
|||||||
Power Factor |
0.9-1.0 |
|||||||
Nominal Output Voltage RMS |
100-110-120Vac / 220-230-240Vac |
|||||||
Output Voltage Regulation |
±10% RMS |
|||||||
Output Frequency |
50/60Hz ± 0.3Hz |
|||||||
Short Circuit Protection |
Yes, Current Limit Function (Fault after 1sec) |
|||||||
Typical transfer Time |
10ms(Max) |
|||||||
THD |
< 10% |
|||||||
DC Input |
Nominal Input Voltage |
12.0Vdc |
||||||
( *2 for 24Vdc, *4 for 48Vdc) |
||||||||
Minimum Start Voltage |
10.0Vdc |
|||||||
Low Battery Alarm |
10.5Vdc / 11.0Vdc |
|||||||
Low Battery Trip |
10.0Vdc / 10.5Vdc |
|||||||
High Voltage Alarm & Fault |
16.0Vdc |
|||||||
High DC Input Recovery |
15.5Vdc |
|||||||
Low Battery voltage recover |
13.0Vdc |
|||||||
Idle Consumption-Search Mode |
< 25 W when Power Saver On |
|||||||
Charge |
Input Voltage Range |
Wide: 90~135VAC / 164~243VAC; |
||||||
Narrow: 100~135VAC / 194~243VAC; |
||||||||
Output Voltage |
Depends on battery type |
|||||||
Charger Breaker Rating |
10A |
10A |
10A |
20A |
20A |
30A |
30A |
|
Max Charge Rate |
35A / 70-90A Max (Charger Current Control) |
|||||||
Over Charge Protection Shutdown |
15.7V for 12Vdc ( *2 for 24Vdc, *4 for 48Vdc) |
|||||||
Charger curve(4 stages constant current)4Step Digital Controlled Progressive Charge |
Battery types ( *2 for 24Vdc, *4 for 48Vdc) |
|||||||
Battery type |
Fast Vdc |
Float Vdc |
||||||
Gel U.S.A |
14 |
13.7 |
||||||
A.G.M 1 |
14.1 |
13.4 |
||||||
A.G.M 2 |
14.6 |
13.7 |
||||||
Sealed Lead Acid |
14.4 |
13.6 |
||||||
Gel Euro |
14.4 |
13.8 |
||||||
Open Lead Acid |
14.8 |
13.3 |
||||||
Calcium |
15.1 |
13.6 |
||||||
De-sulphation |
15.5 for 4hrs |
|||||||
Remote Control |
Yes. Optional |
|||||||
Bypass & Protection |
Input Voltage Waveform |
Sine wave (Grid or Generator) |
||||||
Nominal Voltage |
120Vac |
230Vac |
||||||
Low Voltage Trip |
80V/90V±4% |
184V/154V±4% |
||||||
Low Voltage re-engage |
90V/100V±4% |
194V/164V±4% |
||||||
High Voltage Trip |
140V±4% |
253V±4% |
||||||
High Voltage re-engage |
135V±4% |
243V±4% |
||||||
Max Input AC Voltage |
150VAC |
270VAC |
||||||
Nominal Input Frequency |
50Hz or 60Hz (Auto detect) |
|||||||
Low Freq Trip |
47±0.3Hz for 50Hz, 57±0.3Hz for 60Hz |
|||||||
Low Freq re-engage |
48±0.3Hz for 50Hz, 58±0.3Hz for 60Hz |
|||||||
High Freq Trip |
55±0.3Hz for 50Hz, 65±0.3Hz for 60Hz |
|||||||
High Freq re-engage |
54±0.3Hz for 50Hz, 64±0.3Hz for 60Hz |
|||||||
Output Short circuit protection |
Circuit breaker |
|||||||
Bypass breaker rating |
10A |
15A |
20A |
30A |
30A |
40A |
40A |
|
Transfer switch rating |
30amp for UL & TUV |
40amp for UL |
||||||
Max bypass current |
30amp |
40amp |
||||||
Mechanical Specification |
Mounting |
Wall mount |
||||||
Inverter Dimensions(L*W*H) |
382*218*179mm |
442*218*179mm |
598*218*179mm |
|||||
Inverter Weight |
16KG |
17KG |
20KG |
24KG |
35KG |
45KG |
45KG |
|
Shipping Dimensions(L*W*H) |
520*315*300mm |
580*315*300mm |
740*315*300mm |
|||||
Shipping Weight |
18KG |
19KG |
22KG |
26KG |
37KG |
47KG |
47KG |
|
Display |
Status LEDs / Status LEDs+LCD |
|||||||
Standard Warranty |
1 Year |
On the rear panel of the inverter, there are 5 DIP switches that enable users to customize the performance of the device.
Switch NO |
Switch Function |
Position: 0 |
Position: 1 |
|
SW1 |
Low Battery Trip Volt |
10.0VDCFor Deep-Cycle Battery |
10.5VDCFor Starting Battery |
|
*2for24Vdc,*for48Vdc |
||||
SW2 |
AC Input Range |
AC Source |
For Utility Mode |
For Generator Mode |
230Vac HV |
184-253Vac |
140-270Vac |
||
120Vac LV |
100-135Vac |
90-135Vac |
||
SW3 |
Power Saver Auto Setting |
Night Charger Function |
Detect Load Per 3Secs |
|
SW4 |
O/P Frequency Setting |
50Hz |
60Hz |
|
SW5 |
Solar/AC Priority Setting |
Utility Priority |
Battery Priority |
Low Battery Trip Volt:
The Low Battery Trip Volt is set at 10.0VDC by default. It can be customized to 10.5VDC.
AC Input Range:
There are different acceptable AC input ranges for different kinds of loads.
It can be customized from 184-253VAC to 154-253VAC.
Load Sensing Cycle:
The inverter is factory defaulted to detect load for 250ms every 30 seconds. This cycle can be customized
to 3 seconds thru the SW3 on the DIP switch.
AC/Battery Priority:
Our inverter is designed AC priority by default. This means, when AC input is present, the battery will be
charged first, and the inverter will transfer the input AC to power the load.
The AC Priority and Battery Priority switch are available upon request. When you choose battery priority, the
the inverter will invert from the battery despite the AC input.
Ready to ship in 6-8 weeks from China
Shipping Policy
about the latest shipping freight , please consult the seller.
Refund Policy
un-accept refund unless the problem of quality.
Additional information
Weight | 35 kg |
---|---|
Dimensions | 1 × 1 × 1 cm |
Only logged in customers who have purchased this product may leave a review.
Vendor Information
- Store Name: China YIY Electric
- Vendor: Zhang Jacky
-
Address:
China 325600
Zhejiang / 浙江, Wenzhou, , No. 281, Wei 18 Road, Economic Development Zone, Yueqing, Wenzhou, Zhejiang, China - No ratings found yet!
-
TSD-10KVA Single Phase Wall Mounting Automatic Voltage Regulator Stabilizer Servo Type 150-250V To AC220V
The same product /weight to different country/zone with different shipping freight,so please consult us. Features of Wall Mount Servo Motor…ZK4,269.00ZK3,409.00 -
TSD-3KVA LCD Single Phase Wall Mounting Automatic Voltage Regulator Stabilizer Servo Type 150-250V To AC220V
The same product /weight to different country/zone with different shipping freight,so please consult us. Features of Wall Mount Servo Motor…ZK2,119.00ZK1,689.00 -
PRO -3-15KVA Three Phase AC380V Servo Type Automatic Voltage Regulator Stabilizer Input Voltage 280-430V
The same product /weight to different country/zone with different shipping freight,so please consult us. ♦ MCU control♦ Overload protection(on PCB)≥120%♦…ZK9,000.00ZK7,219.00 -
DC24V 120Ah 3.0KWh Lithium Battery Energy Storage LiFePO4 Support Customize In Stock Long Life Up to 10 Year Free Maintenance Fees
The same product /weight to different country/zone with different shipping freight,so please consult us. â—†LiFePO4 battery â—† rated capacity optional…ZK23,259.00ZK18,609.00
Quality warranty for 3 years .or else exchange the products or refund .
Support maintenance for all the life.
Reviews
There are no reviews yet.